About Door Automation

Smart and Sustainable: The Rise of Eco-Friendly Automatic Door Technologies

Smart and Sustainable: The Rise of Eco-Friendly Automatic Door Technologies

 

Automatic doors have become a common feature in modern commercial buildings, enhancing accessibility, security, and convenience. As sustainability becomes increasingly important, eco-friendly automatic doors are emerging as a powerful solution for businesses seeking to reduce energy consumption and meet green building standards. These advanced systems not only minimize environmental impact but also improve cost savings and operational efficiency.

Evolution of Eco-Friendly Door Technologies

The push for sustainable building solutions has driven the development of eco-friendly automatic doors. Today, manufacturers are revolutionizing automatic door technology to meet higher sustainability standards.

Energy Efficiency and Cost Savings

Modern eco-friendly automatic doors are designed with energy efficiency in mind. Key advancements include:

  • Low-E Glass Technology: Many eco-friendly automatic doors utilize low-emissivity (Low-E) glass, which minimizes heat transfer and reduces heating and cooling demands within commercial spaces.
  • Enhanced Insulation: Improved thermal sealing mechanisms and tighter frames reduce air leakage, enhancing indoor climate control.
  • Motion and Presence Sensors: Advanced sensor technology ensures automatic doors open only when necessary, preventing excessive heat loss or gain.

By incorporating these innovations, eco-friendly automatic doors reduce energy waste, contributing to lower utility bills and improved building efficiency.

Material Innovations in Eco-Friendly Doors

Sustainability is not limited to energy efficiency; the materials used in manufacturing automatic doors play a significant role as well. Modern eco-friendly doors feature:

  • Recycled Aluminum Frames: Lightweight yet durable, recycled aluminum minimizes the demand for raw materials while ensuring structural strength.
  • Sustainable Glass Options: Manufacturers increasingly use glass made from sustainable sources or recycled content, reducing environmental impact.
  • Eco-Conscious Coatings and Finishes: Low-VOC coatings are now standard in automatic doors, ensuring uncompromised indoor air quality.

These material innovations align automatic door systems with broader green building objectives, such as LEED certification.

Certification and Compliance Standards

Eco-friendly automatic doors are often designed to meet or exceed established green building certifications, including:

  • LEED (Leadership in Energy and Environmental Design): Doors equipped with energy-saving features contribute points toward LEED certification for commercial buildings.
  • NYC Building Code: New York City has the most strict energy code in the country.

Building owners and architects can align their projects with sustainable best practices by choosing eco-friendly automatic doors that adhere to these certifications.

Benefits of Sustainable Automatic Doors

Eco-friendly automatic doors provide a variety of advantages that extend beyond environmental impact. Their benefits include:

Improved Energy Efficiency

Sustainable automatic doors reduce energy consumption, helping commercial spaces maintain comfortable indoor temperatures and lowering utility costs.

Enhanced Indoor Comfort

By minimizing drafts and temperature fluctuations, eco-friendly automatic doors contribute to a more pleasant environment for occupants.

Reduced Maintenance Costs

Modern designs with improved insulation, durable materials, and advanced sensors experience fewer operational issues, leading to lower maintenance costs over time.

Compliance with Green Building Standards

Eco-friendly automatic doors make it easier for building owners to achieve certifications like LEED, demonstrating their commitment to environmental responsibility.

Enhanced User Experience

Features such as touchless access improve hygiene and convenience, which is particularly important in high-traffic commercial spaces and healthcare facilities.

Installation and Maintenance Insights

Proper installation and ongoing maintenance are critical to maximizing the efficiency and longevity of eco-friendly automatic doors. Consider the following best practices to ensure optimal performance:

Installation Best Practices

  1. Partner with Experienced Professionals: Work with trusted industry experts, like Door Automation Corporation, to ensure proper installation and adherence to energy efficiency standards.
  2. Assess Building Layout: Position doors in strategic locations to minimize exposure to outdoor elements and reduce drafts.
  3. Calibrate Sensors Accurately: Ensure motion and presence sensors are configured for optimal responsiveness to avoid unnecessary openings.
  4. Install Energy-Saving Modes: Many modern automatic doors include energy-saving settings that reduce motion sensor sensitivity during off-peak hours.

Ongoing Maintenance Tips

  1. Routine Cleaning: Regularly clean door sensors, tracks, and seals to maintain smooth operation and prevent debris buildup.
  2. Inspect Weatherstripping: Check for gaps or worn-out weatherstripping that may compromise insulation.
  3. Schedule Professional Inspections: Annual maintenance visits by trained technicians help identify potential issues before they escalate.

Sustainable Solutions with Door Automation Corporation

Eco-friendly automatic doors are an excellent investment for businesses aiming to reduce energy consumption and support environmental sustainability. Whether you’re upgrading existing entryways or designing a new commercial building, Door Automation Corporation offers reliable solutions tailored to your needs.

At Door Automation Corporation, we provide a comprehensive range of automatic and manual door systems, including swing, slide, and revolving doors. Our skilled professionals install energy-efficient entryways that meet industry standards for automated door energy compliance. We also provide innovative non-contact door operation solutions to enhance hygiene and convenience—an increasingly essential feature in today’s commercial spaces.

As trusted design consultants working with top architectural firms in New York City, our team is dedicated to delivering reliable, functional, and secure door solutions that meet the highest performance and sustainability standards.

Contact us today to explore our range of eco-friendly automatic doors and enhance the energy efficiency of your commercial space.

What Are Building Access Control Systems?

The Future of Entryways: Innovations in Automatic Door Technology

 

The way people access buildings is evolving, and automatic door technology is at the forefront of this transformation. From energy efficiency to touchless operation and smart integrations, automatic doors are enhancing convenience, security, and sustainability in modern buildings. As the demand for intelligent entryway solutions grows, businesses and property owners must stay informed about the latest innovations shaping the future of automatic door systems.

Emerging Trends in Automatic Door Technology

Automatic doors have come a long way from simple motion-activated sliding doors. The latest advancements are making these systems more efficient, secure, and adaptable to various environments. From integrating artificial intelligence to using eco-friendly materials, these emerging trends are setting new standards for entryways.

Energy-Efficient Technologies in Automatic Doors

One of the most significant innovations in automatic door technology is the integration of energy-efficient solutions. As businesses strive to meet sustainability goals, modern automatic doors are being designed to minimize energy consumption.

  • Insulated and Low-E Glass Doors: Many automatic doors now feature insulated or Low-E (low emissivity) glass, which reduces heat transfer and helps maintain interior temperatures. This is particularly beneficial for commercial spaces looking to reduce heating and cooling costs.
  • Thermally broken door and frames which prevent the exterior cold temperatures from being transmitted through the door and frame to the interior.

 

  • Adaptive Motion Sensors: Traditional motion sensors open doors as soon as motion is detected, often leading to unnecessary energy loss. New adaptive sensors can distinguish between intentional and accidental movement, reducing instances of unnecessary openings.
  • Air Curtain Integration: Air curtains installed above automatic doors create a barrier that prevents external air from entering, improving indoor climate control and reducing HVAC energy costs.

 

Touchless Solutions for Enhanced Hygiene and Accessibility

The COVID-19 pandemic accelerated the adoption of touchless technology in public spaces, and automatic doors played a crucial role in minimizing contact points.

  • Wave-to-Open Sensors: Instead of pushing a button, users can wave their hands in front of a sensor to activate the door, eliminating the need for physical contact.
  • Mobile App Controls: Some advanced automatic door systems can be controlled via mobile applications, allowing users to open doors using their smartphones.
  • Voice-Activated Doors: Integration with voice recognition technology enables users to command doors to open with simple verbal instructions.
  • RFID and Facial Recognition Access: In high-security environments, doors equipped with RFID technology or facial recognition allow seamless entry for authorized personnel.

How Smart Features Are Revolutionizing Automatic Doors

The rise of smart technology has significantly improved the functionality and intelligence of automatic door systems. Today’s smart doors are more than just entry points; they are an integral part of a building’s security and automation strategy.

Integrating Automatic Doors with Building Automation Systems

Automatic doors are no longer standalone solutions—they are becoming key components of integrated building management systems (BMS). By connecting to these networks, automatic doors can enhance security, efficiency, and user experience.

  • Real-Time Monitoring and Diagnostics: Smart doors can be monitored remotely, with real-time data on door usage, performance, and maintenance needs.
  • Integration with Security Systems: Automatic doors can be linked to access control systems, ensuring only authorized individuals enter restricted areas.
  • Data-Driven Traffic Analysis: Businesses can analyze entry and exit data to optimize building layouts, staffing levels, and security protocols.
  • Emergency Protocols: Smart doors can be programmed to respond to emergency situations by automatically locking down or providing quick exit routes.

The Benefits of Upgrading to Advanced Automatic Door Systems

Investing in modern automatic door technology provides numerous advantages for commercial buildings, hospitals, retail stores, and other public spaces.

  • Enhanced Security: With features like biometric access control, smart locks, and remote monitoring, automatic doors contribute to better security.
  • Improved Accessibility: Touchless and smart entry solutions make it easier for individuals with disabilities to access buildings.
  • Increased Energy Efficiency: Upgraded doors with energy-saving features help businesses reduce operational costs.
  • Better Hygiene: Reducing contact points lowers the spread of germs, a crucial benefit in healthcare and food service industries.
  • Compliance with Modern Standards: New automatic doors meet energy compliance regulations and accessibility requirements, ensuring businesses stay up to date with legal standards.

Future-Proof Your Entryways with Door Automation Corporation

As automatic door technology continues to evolve, businesses must stay ahead of the curve to provide secure, efficient, and convenient entryways. Door Automation Corporation is your trusted partner in integrating cutting-edge automatic door solutions for commercial spaces. Whether you need swing, slide, or revolving doors, our industry-leading products and expert team ensure reliable, functional, and secure entry solutions.

We specialize in non-contact door operation modifications, helping businesses adapt to the growing demand for touchless technology. Our automatic doors comply with standard automated door energy regulations, making them a smart choice for energy-conscious businesses. Additionally, as experienced design consultants, we collaborate with top architectural firms in New York City to create innovative and aesthetically pleasing entryways.

Upgrade your entryways with the latest in automatic door technology. Contact us today to discuss your needs and find the perfect solution for your commercial space. Quote

Durability and Style: Caring for Stainless Steel Doors in Manhattan Properties

Durability and Style: Caring for Stainless Steel Doors in Manhattan Properties

 

Stainless steel doors are an ideal choice for Manhattan properties, offering a perfect balance of durability, security, and aesthetic appeal. Whether used in commercial buildings, luxury residential developments, or industrial facilities, these doors stand up to the test of time while maintaining a sleek and modern appearance. However, regular care and maintenance are essential to keep stainless steel doors looking pristine and functioning optimally.

Why Choose Stainless Steel Doors for Manhattan Properties?

Manhattan’s high-traffic commercial and residential spaces require entryways that are both sturdy and visually appealing. Stainless steel doors meet these demands due to their:

  • Exceptional Durability: Resistant to rust, corrosion, and damage from environmental factors.
  • High Security: Stainless steel doors provide a solid and reliable barrier against forced entry.
  • Low Maintenance: Unlike wood or aluminum, stainless steel requires minimal upkeep to maintain its appearance.
  • Modern Aesthetic: The sleek and sophisticated look of stainless steel enhances the professional appearance of commercial properties.
  • Fire Resistance: Many stainless steel doors are fire-rated, adding an extra layer of safety.

For these reasons, business owners, property managers, and architects in New York City frequently choose stainless steel doors for their buildings.

Regular Cleaning and Maintenance

To ensure stainless steel doors remain in top condition, it’s important to follow a routine cleaning and maintenance schedule. Here are some key steps:

Daily and Weekly Cleaning

  • Dust and Wipe Down: Use a soft, lint-free cloth or microfiber cloth to remove dust and fingerprints.
  • Mild Soap and Water: Mix warm water with a mild detergent or dish soap. Use a damp cloth to wipe down the surface, then dry it immediately to prevent water spots.
  • Non-Abrasive Cleaners: Avoid using harsh chemicals, scouring pads, or steel wool, as these can scratch the surface.

Removing Stains and Smudges

  • Fingerprints and Smudges: A mixture of vinegar and water or a stainless steel cleaner can effectively remove fingerprints.
  • Grease or Oil Marks: A small amount of rubbing alcohol or acetone can be applied with a cloth to break down grease.
  • Rust or Corrosion Spots: While stainless steel is resistant to rust, occasional exposure to harsh environments can cause small rust spots. A paste of baking soda and water can be used to gently scrub affected areas.

Preventing Scratches and Damage

  • Use Soft Materials: Always use soft cloths or sponges for cleaning to avoid scratching the surface.
  • Avoid Harsh Chemicals: Chlorine-based or acidic cleaners can cause discoloration or pitting in stainless steel.
  • Regular Inspections: Periodically check for dents, scratches, or other damage that might require professional repair.

Protecting Stainless Steel Doors from Environmental Damage

Manhattan’s climate, with its humidity, rain, snow, and pollution, can take a toll on stainless steel doors. Here are a few steps to protect them:

  • Apply a Protective Coating: A stainless steel polish or protective sealant can help repel moisture and dirt.
  • Install Overhangs or Canopies: These can provide additional protection from direct exposure to the elements.
  • Regularly Check for Moisture Buildup: Ensure that door frames and seals are intact to prevent water damage and rust.

Ensuring Functionality and Longevity

Beyond keeping stainless steel doors clean, it’s essential to maintain their functionality. This includes:

  • Lubricating Hinges and Tracks: Apply a silicone-based lubricant to prevent squeaking and ensure smooth operation.
  • Inspecting Seals and Gaskets: Check for wear and tear on weather stripping and replace it if necessary.
  • Checking Automatic Door Mechanisms: For stainless steel automatic doors, ensure that motion sensors and safety features are working correctly.

Non-Contact Door Solutions for Modern Buildings

With the ongoing emphasis on hygiene and touch-free entry solutions, many Manhattan properties are upgrading their doors to offer non-contact access.

Door Automation Corporation provides:

  • Motion-Activated Entry Systems: Allowing hands-free access to commercial buildings.
  • Wave Sensor Controls: Enabling users to open doors with a simple wave.
  • Smart Integration: Ensuring doors work seamlessly with security and building automation systems.

These upgrades not only enhance convenience and safety but also contribute to a more modern and sophisticated building environment.

Why Work with Door Automation Corporation?

When it comes to high-quality stainless steel doors and entryway solutions, Door Automation Corporation is the trusted name in New York City. We specialize in:

  • Automatic and manual door solutions, including swing, slide, and revolving doors.
  • Custom modifications for non-contact door operation, ensuring compliance with current safety and hygiene standards.
  • Industry-leading products, providing secure and dependable entryways.
  • Collaboration with top architectural firms, ensuring seamless integration with building designs.

Whether you need new stainless steel doors, modifications for automatic functionality, or expert maintenance, our team is ready to assist.

Contact Us Today

Ensure your Manhattan property is equipped with durable, stylish, and functional stainless steel doors. Contact us today to discuss your door automation needs and schedule a consultation with our experienced team.

sliding door cost

Enhancing Accessibility: The Benefits of Automatic Sliding Doors for Businesses

 

In today’s fast-paced and customer-centric world, businesses are constantly seeking ways to enhance accessibility and improve the overall customer experience. Automatic sliding doors have emerged as a key solution for creating welcoming and efficient commercial spaces. These doors not only streamline customer entry and exit but also provide functional, aesthetic, and compliance benefits that align with modern business goals.

Why Accessibility Matters in Commercial Spaces

Accessibility is more than a legal requirement—it is a cornerstone of inclusive business practices. Ensuring that all customers, including those with mobility challenges, can easily navigate your establishment enhances their experience and fosters brand loyalty.

Meeting Diverse Needs

From wheelchair users to parents with strollers and elderly patrons, individuals of all abilities require seamless access to commercial spaces. Manual doors can present significant challenges, particularly when they are heavy or difficult to operate. Automatic sliding doors eliminate these barriers, offering a hands-free solution that promotes inclusivity.

A Competitive Advantage

Businesses that prioritize accessibility often gain a competitive edge. An accessible environment signals that your company values every customer, which can boost foot traffic and foster positive word-of-mouth. Moreover, accessibility improvements often align with other enhancements, such as energy efficiency and aesthetic upgrades, contributing to a more inviting atmosphere.

Key Benefits of Automatic Sliding Doors for Businesses

Automatic sliding doors are more than just an entryway—they are a strategic investment that delivers multiple advantages for businesses.

Improving Customer Flow with Automatic Sliding Doors

Efficient customer flow is essential for commercial spaces, particularly in high-traffic areas such as retail stores, restaurants, and healthcare facilities. Automatic sliding doors facilitate smooth movement by opening instantly when someone approaches and closing just as swiftly. This not only minimizes congestion but also enhances safety by reducing the risk of door-related accidents.

Sliding doors also provide an intuitive and user-friendly experience. Customers appreciate the ease of walking into a store or office without having to manually open a door, which is particularly beneficial when their hands are full. This small convenience can significantly elevate the overall customer experience.

Energy Efficiency and Cost Savings with Sliding Doors

Modern automatic sliding doors are designed with energy efficiency in mind. Their rapid open-and-close mechanism helps regulate indoor temperatures, minimizing heat loss in the winter and keeping air conditioning inside during the summer. This contributes to reduced energy consumption and lower utility bills.

Additionally, many automatic sliding doors are equipped with advanced sensors and timers that ensure they operate only when needed, further optimizing energy use. Over time, these cost savings can offset the initial investment, making sliding doors a financially sound choice for businesses.

Ensuring ADA Compliance with Modern Automatic Doors

The Americans with Disabilities Act (ADA) requires businesses to provide accessible entrances for individuals with disabilities. Automatic sliding doors are an excellent way to meet these standards while enhancing the overall functionality of your space.

These doors are designed to accommodate wheelchair users, offering a wide and unobstructed entryway. They also comply with ADA requirements for force and speed, ensuring that they operate safely for all users. Installing ADA-compliant doors not only prevents potential legal issues but also demonstrates your business’s commitment to inclusivity.

How to Choose the Right Automatic Sliding Door for Your Business

Selecting the ideal automatic sliding door requires careful consideration of your business’s unique needs, aesthetics, and budget. Here are some factors to guide your decision.

Assessing Traffic Patterns

Understanding the flow of traffic in your space is crucial when choosing a sliding door. For businesses with high foot traffic, such as shopping malls or hospitals, doors with robust sensors and quick response times are essential. For smaller offices or boutique stores, a single-panel sliding door may suffice.

Prioritizing Durability and Maintenance

Automatic sliding doors are an investment, so it’s important to choose a product that is durable and easy to maintain. Look for doors made from high-quality materials and equipped with reliable mechanisms. Additionally, partnering with a reputable service provider, like Door Automation Corporation, ensures that your doors are installed correctly and maintained regularly for optimal performance.

Enhancing Aesthetics

Automatic sliding doors come in various styles and finishes, allowing you to select a design that complements your building’s architecture. From sleek glass panels to custom finishes, these doors can enhance the visual appeal of your space while maintaining functionality.

A Trusted Partner for Your Automatic Sliding Door Needs

At Door Automation Corporation, we understand the pivotal role that automatic sliding doors play in modern commercial spaces. We provide tailored solutions that prioritize accessibility, energy efficiency, and aesthetic appeal. Whether you need new installations or modifications for non-contact door operation, we have the expertise to deliver exceptional results.

Why Choose Door Automation Corporation?

  • Comprehensive Solutions: We offer a full range of products for commercial spaces, from swing and sliding doors to revolving and manual options.
  • Expert Team: Our skilled professionals work closely with top architectural firms in New York City to ensure seamless design and installation.
  • Energy Compliance: We provide automatic doors that meet standard energy compliance requirements, helping businesses align with modern sustainability goals.
  • Non-Contact Options: In light of COVID-19, we offer solutions for non-contact door operation, promoting hygiene and safety.

Elevate Your Business with Automatic Sliding Doors

Enhancing accessibility with automatic sliding doors is a smart move for any business looking to improve customer experience, comply with accessibility standards, and optimize operational efficiency. These doors provide a seamless, energy-efficient, and aesthetically pleasing entryway that benefits both businesses and their customers.

Partner with Door Automation Corporation to transform your commercial space into an accessible and welcoming environment. With our reliable professionals, industry-leading products, and commitment to excellence, we’re here to help your business thrive. Contact us today to learn more about our automatic door solutions and schedule a consultation. Together, let’s create entryways that open the door to endless possibilities.

A Comprehensive Guide to Choosing the Right Revolving Door for Your Commercial Space

A Comprehensive Guide to Choosing the Right Revolving Door for Your Commercial Space

 

Revolving doors are more than just entryways—they are an elegant fusion of functionality, efficiency, and aesthetic appeal. For commercial spaces, they serve as a statement piece while optimizing traffic flow and improving energy efficiency. Selecting the right revolving door involves balancing practical considerations and design aspirations.

Why Revolving Doors Are Ideal for Commercial Spaces

Revolving doors have become a staple of modern architecture, especially in bustling commercial environments. Their unique design offers numerous advantages that other entry systems cannot match.

How Revolving Doors Enhance Energy Efficiency and Traffic Flow

One of the standout benefits of revolving doors is their ability to maintain indoor climate control. Unlike traditional swinging or sliding doors, revolving doors minimize air exchange between the interior and exterior, significantly reducing heating and cooling costs. This energy efficiency is particularly important for high-traffic buildings where doors are constantly in use.

Additionally, revolving doors manage foot traffic more effectively. They create a continuous flow, preventing bottlenecks during peak hours. This feature is especially beneficial for hotels, office buildings, and shopping centers where smooth entry and exit are essential for a positive visitor experience.

Aesthetic Appeal and Brand Identity

Revolving doors add a touch of sophistication to any building. Available in a variety of materials and finishes, they can complement the architectural style of your space while making a lasting impression on visitors. From sleek glass designs to bold metallic accents, revolving doors can be tailored to reflect your brand identity.

Factors to Consider When Choosing a Revolving Door

Selecting the right revolving door requires careful consideration of various factors, from size to material to safety standards. Here’s what you need to know.

Understanding Material and Design Options for Revolving Doors

Revolving doors are available in a wide range of materials and designs, allowing you to find a solution that meets your aesthetic and functional needs.

  1. Glass Panels

Glass revolving doors offer a sleek, modern look and allow natural light to flood your entryway. They are often used in retail stores, hotels, and office buildings to create an open and inviting atmosphere.

  1. Metal Finishes

For a more industrial or robust design, consider revolving doors with stainless steel or aluminum finishes. These materials are durable and resistant to wear, making them ideal for high-traffic areas.

  1. Wood Accents

If your commercial space features a classic or rustic design, wood-framed revolving doors can add a touch of warmth and elegance.

  1. Customization Options

Many revolving door systems allow for extensive customization. Add your company’s logo, select specific colors, or choose unique configurations to create an entryway that aligns with your brand.

Maintaining Safety Standards with Modern Revolving Doors

Safety is a critical aspect of any revolving door installation. Modern systems are equipped with advanced features to ensure user safety, including:

  • Sensor Technology: Automatic revolving doors often feature motion sensors and emergency stop functions to prevent accidents.
  • Accessibility Compliance: Ensure your revolving door meets ADA standards by incorporating wider compartments or automatic opening features.
  • Fire and Security Standards: Verify that the revolving door system complies with local building codes, including fire safety and emergency egress requirements.

Size and Configuration

The size of your revolving door should correspond to the level of traffic your commercial space experiences. Larger doors with multiple compartments are better suited for high-traffic environments like airports or malls, while smaller doors are ideal for boutique shops or office buildings with moderate foot traffic.

Benefits of Professional Installation for Revolving Doors

Revolving door installation is a complex process that requires precision and expertise. Hiring a professional ensures your door functions seamlessly and complies with safety standards.

Expertise in Customization and Compliance

Professional installers can tailor your revolving door to fit your specific needs. Whether you need a custom size, unique material, or advanced safety features, experts ensure the door integrates perfectly with your building design.

They also stay current on building codes and regulations, guaranteeing that your door meets energy efficiency and accessibility standards.

Long-Term Reliability and Maintenance

A professionally installed revolving door is more likely to operate smoothly for years to come. Regular maintenance services offered by professionals further extend the life of your investment, addressing potential issues before they escalate.

Why Choose Door Automation Corporation?

When it comes to revolving doors, working with a trusted partner like Door Automation Corporation ensures you receive a high-quality, reliable solution tailored to your commercial space.

  • Unparalleled Expertise: We collaborate closely with top architectural firms in New York City, delivering innovative door solutions that align with modern design trends.
  • Energy Compliance: Our automatic doors meet standard automated door energy compliance requirements, reducing operational costs.
  • Non-Contact Door Openings: In response to COVID-19, we have modified non-contact door operations to ensure safety and convenience.
  • Comprehensive Product Range: From revolving doors to swing, slide, and manual doors, we offer solutions for every need.

Contact Us Today

Revolving doors are more than just entryways—they are a reflection of your commercial space’s identity and a tool to enhance its functionality. Let Door Automation Corporation help you find the perfect solution. Contact us today to explore our extensive range of revolving doors and other access solutions. With our expertise and commitment to quality, we’ll ensure your building’s entryway is functional, secure, and visually striking.